STATOR + CNC MOSFET KIT GSXR600/750 06-19 (RMS900-107319)
STATOR + CNC MOSFET KIT GSXR600/750 06-19 (RMS900-107319)
SKU:
Couldn't load pickup availability
Brand new aftermarket Stator + Crankcase Cover Gasket + Mosfet Voltage Regulator Kit
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Stator:
- Highest-grade lamination materials
- Highest-grade copper windings, resistant to 200 degrees Celsius.
- Stator crankcase cover gasket included
- Connector included
- Rubber grommet included
Brand new RMSTATOR Red Machined Aluminum Mosfet Regulator
Our new RMSTATOR machined aluminum Mosfet voltage regulator is a great upgrade for heat dissipation in any powersports charging system. After 10 minutes of use, our billet aluminum heatsink runs cooler by 33% than standard cast regulator housings. Our new RMSTATOR red regulator, equipped with the renowned Mosfet regulation technology, is an added value to any three- phase permanent magnet charging system.
STOP BURNING YOUR REGULATOR RECTIFIER!
It is time to update or replace your voltage regulator with the advanced MOSFET type.
It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up, it will simply turn off for a while and cool off.
- The quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components
Why use Mosfet Enhanced technology?
- Runs cooler: Runs much cooler than the traditional Shunt voltage regulator rectifier.
- Saves gas: Less load on the stator, less work, less fuel is used and you save.
- Regulated energy: The power charging your battery is steadier and smooth.
- Extended battery life: Extends the battery’s life and cold cranking capacity.
- More engine power: Removes stator load resulting in more engine power.
- Optimized power: Optimize power delivery by switching the stator coils on or off.
With Enhanced Technology Design
This product is an advanced design that lowers operating temperatures for extended longevity and better performance than the OEM part.
Specifications:
- Dim ensions Stator:
- Interior diameter: 38 mm
- Exterior diameter: 107 mm
- Thickness: 12 mm
- Length of wires stator to grommet: 160 mm
- Length of wires grommet to plug: 330 mm
- Other specifications:
- Number of wires: 3
- Number of plugs: 1
- Number of pins: 3
- Wire-to-wire resistance:
- Alternator: Yellow to Yellow = 0.5 ohms +/-20%
- Regulator dimension:
- Width: 92 mm
- Length: 92 mm
- Height: 30 mm
- Fixation holes center to center: 75 mm
- Wires length: 300 mm
- Other specifications:
- Number of plugs: 2
- Number of pins: 7
- Number of wires: 7
- Minimum Charging Voltage: 14.5 V +/- 0.5 V
- Maximum Charging Current: 50 A / 500 W
- Open Circuit Voltage: < 15 V
- Operation Temperature: -20° C to 85° C
Note: Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Schmart Schtock
There are a huge number of products out there for motorcyclists! We keep certain products in store and others online only.
For every product, you can see where it is by looking under the product title.
-
PRICE MATCH!
Seen the exact product somewhere else for a cheaper price?
Give us the chance to match it! Just get in touch with us and let us know where you saw it.
-
DESPATCH TIMES.
We will get your order out as soon as we can! Below is an estimate of when your order will be shipped.
Store stock: 1 business day.
Warehouse stock: 3 business days.
Helpful info.
Don't know your size?
Please click on the brand to see relating size charts. These are a guide to help you find the correct fit.
If you have any queries regarding sizing, please get in touch with us via email or give us a call.
E: info@highside.com.au
T: 03 9290 9849
Get in touch with us.
Need to ask us something?
Call us on 03 9290 9849 or email us at info@highside.com.au.
Shipping Times
Free Shipping
We offer free shipping on all orders over $199 within Australia! We use standard Auspost shipping. Orders that that do not meet this threshold will incur a shipping fee of $10.
Express Shipping
Need something in a hurry?
We offer an express shipping option through Australia Post. The cost of express shipping is $15.
Handling Time
We aim to have your order dispatched within 1-3 days. This does not take into account public holidays and weekends.
Shipping Time
We use standard Australia Post to send your order. Below is an estimate of expected shipping lead times. Please note that these delivery times represent the shortest and longest expected lead times.
|
Destination
|
Australia Post Delivery Time
|
|
Australian Capital Territory
|
3 to 11 business days
|
|
New South Wales
|
4 to 10 business days
|
|
Northern Territory
|
7 to 14 business days
|
|
Queensland
|
5 to 11 business days
|
|
South Australia
|
6 to 9 business days
|
|
Tasmania
|
6 to 14 business days
|
|
Victoria
|
2 to 8 business days
|
|
Western Australia
|
9 to 15 business days
|
If you opt for express shipping, you will receive your order in approx. 1-3 business days after despatch depending on your location.
International Shipments
At this stage, Highside does not ship overseas through our online store. If you overseas, please get in touch with us at info@highside.com.au and we can prepare a custom quote for you.